bst365最新正规买球

Pharmaceutical Machine

[  HOME  ]
PRODUCT PROFILE  ]
  ]

  

  

  

 

Home>Main Products>Capsule Filling Machine Series


KDF-2 Vertical Semi-Automatic Capsule Filling Machine (Discontinued)

kdf-2.jpg (10966 bytes)

GENERAL:

Since 1971 KWANG DAH has specialized in the manufacturer of capsule series machines such as :
auto capsule filling machine, blister packing machine batch counter, polishing machine, inspection machine and strip packing machine.

KDF-2 is a new semi-automatic capsule filling machinewhich is a improved machine from type 8 filling machine.

This improvement results in faster production, meeting G.M.P. requirment, more accurate filling, safer operation, simple maintenance, no noise, easy clean and less labor.

 

FEATURES:

1.

All stainless shells, hoppers, machine table.ets. meet G.M.P. requirement.

2.

Infinitely variable speed of filling tablet with independent power and fix point filling that result in accurate dosage.

3.

No painting finish on the machine surface thus it can avoid that the paint strip off and mix into the powder, then fill into the capsules..

4.

A hydraulic join system can increase join power and smoothen join without any damage of capsule.

5.

A special design allows for changing mold for different size capsules within 15 minutes easily, simply, precisely.

6.
Simple structure and low malfunction, easy to maintain and clean.
7.
Simple operation, only one operator required, and operating training can be done in 10 minutes.
8.
No noise, no public harm.
   
   
OPERATIONS: There are 3 stations in this semi-auto capsule filling machine(KDF-2).

The first one is orientation of capsule, the second one is powder filling ,and the last one is capsule closing.

kdf2p1.jpg (11687 bytes) THE FIRST STATION:ORIENTATION OF CAPSULE
The functions of first station include capsule feeding, aligning and insertion into bores of holding ring . Also, vacuum is used
for separating capsule cap and body in first station. After orientation of capsule, capsule cap can stay in upper holding ring and capsule body can stay in lower holding ring.
THE SECOND STATION:POWDER FILLING
Separate the holding ring,put the lower (body) holding ring on the rotary table, pull the powder hopper over the lower (body) holding ring, then auger inside powder hopper starts to run and fill powder into the capsule body. While I ower holding ring turns one circle, push powder hopper to its original opsition.
kdf2p2.jpg (11031 bytes)
kdf2p3.jpg (10155 bytes) THE THIRD STATION:CAPSULE CLOSING
Put upper holding ring and lower holding ring together, then take the holding ring ahead of ejector and aim ejector at the bores of holding ring . Use hydraulic cylinder to push ejector and let it press capsules for closing. Finally push capsules inside the bores of holding ring out, the finished capsules will be collected into the container.
TECHNICAL DATA
Capacity: Max. 25,000 Pcs/HR
Power Supply: AC 220/380V, 50/60HZ
Power Consumption: Machine 1-1/4 HP
Hydrolic 1 HP
Vacuum 2 HP
Machine Size 167cm x 102cm x 164cm


PACKING DATA
Packing Size 182 x 117 x 179 cm
Net Weight: 600 kgs
Gross Weight: 740 kgs

OTHER PRODUCTS
1.
Auto capsule filling machine.
2.
Batch counter.
3.
Auto strip pack machine.
4.
Auto blister pack machine.
5.
Capsule polishing machine
6.
Capsules/tablets inspection machine.
7.
Auto count & container feeding machine.
8.
Automatic soft gelatine capsule making machine.

APPLICABILTY
1.
Can fill capsule sizes 00-0-1-2-3-4-5.
2.
Can fill material in either powder or granule forms.


Machine Size:
 
[ ]
[ Home ]

 


(Try this webside)

If you don't know which machine you need ↑↑

E-mail: kd033512@gmail.com  We'll reply your enquiry within 24hrs.

TEL:886-2-29713333,886-2-29818888 FAX:886-2-2982-6645